Double Glazed Window Repair
It's worth checking the warranty that comes with double-glazed windows in the majority of cases. Generally, it includes any problems with the window hardware - hinges and locking mechanisms within the first 10 years.
The mist that forms between the glass windows can be caused by a crack in the seal and needs to be repaired quickly to stop damp or mould from forming in your house.
Condensation Between the Windows
If you notice condensation forming between your windows, this could be an indication that the seal holding in the gas insulating the windows has failed. This could be a major issue that should be addressed immediately especially in winter when humidity is at its highest. It could also lead to damage around the sills and sealant, and even mould or mildew.
Ideally double-glazed windows shouldn't experience condensation between the panes. However, it is not unusual to have high humidity or an extremely cold snap to cause this problem. Fortunately, it is repairable without having to replace the entire window. A professional can drill tiny holes in the window and spray a special cleaning solution inside. The water is then sucked out of the window and an anti-fogger device can be fitted to prevent further accumulation of moisture in the future.
Condensation between windows can be due to air leakage or other causes outside of the window. In this case it could take longer for the condensation in the window to build up, because the air must be sufficiently warm to vaporise the water molecules. In these situations it is best to replace double-glazed windows than trying to repair the sealed units.
A double-glazed glass window composed of two or more pieces of tempered insulated glass that are held together by a metal frame. The gap between the two windows is filled with an insulating gas, such as Krypton or argon, and then sealed. The seal is responsible for preventing the gas used to insulate from escaping and also prevents air and moisture from getting through the gap.
As the windows get older, the seals weaken and allow moisture to leak into the gap between the glass panes. It is crucial to recognize the signs of leaks in the seals, as it means that the double glazing is no longer functioning as efficiently as it used to. This could lead to poor energy efficiency, increased heating costs, a damaged properties and the risk of condensation between the windows.
Mist
If you see condensation on the outside of your windows, it is normal and indicates that your double glazing is in good working order and retaining the heat inside your home. The condensation forms because the outside air is more warm than the glass and it reaches its dew point before the window. This is one of the major advantages of having high-quality double glazing.
If the condensation is on the inside of your window then it could be a sign of a problem with the ventilation in your home. The excess moisture won't go anywhere else and ends in the carpet, window furniture, and other parts of your home. It is possible to prevent this by having it examined by an expert and ensuring that there is sufficient fresh air inside your home.
The other reason you might have mist in your double-glazed window is that the seal between the two panes has worn down. This could be due wear and wear or chemical cleaning solutions being employed. If this occurs the best solution is to get the windows repaired as soon as you can.
Professionally repairing your windows will ensure that they remain clear of fog free of condensation, and free of misting. It's also less expensive than replacing them all the way through and will also save you money on your energy bills.
A FENSA-registered window installer can provide you with a price to repair or replace your double glazed Windows. Upgrade your old windows to energy-efficient A-rated ones when they are old.
It is a great idea to keep copies of any warranties and agreements with your window fitting company. This will be very helpful in the event that any issues with your windows develop in the future, and you then contact your installers to resolve the issues. This is a better option than ignoring the problem and causing additional problems in your home.
Close or open with difficulty
It's not just a nuisance when double-glazed windows can be difficult to open or close. They can also result in higher energy bills because of the loss of heat and draughts. It can also pose security risks, particularly if the locks don't work correctly. It is essential to fix any issues with double-glazed doors and windows immediately you notice them.
If you have tried opening your window using the most basic methods, like using an electric screwdriver or tapping the frame using a solid object, the problem could be more serious. It could be that the window has shifted in its frame and needs to be set again or there is a gap between the glass panes and the frames. In either case you should seek out a double glazing repair expert to ensure that the repairs are done properly and to prevent further problems.
It is not common to find UPVC window handle and lock mechanisms to become difficult to operate or become stuck particularly if they're old and worn. This is caused by an accumulation of dirt or grease inside the handle. It can be cured by cleaning it using a uPVC cleaner. If this doesn't work then you could try gently tapping the uPVC frame with a hard object, such as a screwdriver, being careful not to scratch the handle or the window handle mechanism.
If this does not solve the problem, the window will need to be replaced because the hinges may not be in the proper place or the locking mechanism might have been damaged. In this case you should consult an UPVC window expert.
David The Window Wizard is a specialist in double-glazed door and window repairs, including repairing windows that are double-glazed and have been shut or jammed. He has extensive experience with changing old window mechanisms to modern ones and will often reduce the cost of replacing the entire window. Call or email us today for more information or a free estimate.
Warping
Double-glazed windows can be an excellent way to save energy in your home. They are made up of two separate panes which have a spacer, or dense gas in between them. This creates a seal which keeps cold air out and warm within. Over time, however windows can become damaged or broken and require repair. Most repairs can be completed without replacing the entire window.
One of the most common issues double glazed windows experience is warping. This occurs when the windows begin to bow, bend or twist, which could alter the structural integrity of the window as well as its insulation capabilities. The best method to avoid this problem is to make sure that your double-glazed windows are installed correctly and maintained regularly.
Contact a professional immediately if you realize that your double-glazed windows are warping. This will help prevent the situation from getting worse. They can inspect your windows to identify the cause. They will use specific tools to correct the issue and make sure that your windows are completely sealed.
A common cause of this issue is water vapour in the windows which can build up over time. It can be caused by many factors, including the weather conditions as well as humidity levels and temperature fluctuations. To address this issue the expert will drill out a small hole to let the moisture out. The specialist will use a cleaning agent on the glass to clean it, then apply sealant.
If your windows can't be shut or opened it could be due to a damaged mechanism or hinges. Before calling an expert to resolve the problem, it upvc repairs near me is worth lubricating the parts. This can often resolve the issue and reduce the need for replacements. If your windows are worn out or don't provide the insulation you want It may be better to replace them.